The WEPS14 is a Bluetooth wireless pressure sensor manufactured for simple measurements on a variety of applications. This silicon pressure sensor was designed to supply an economical solution for industrial, consumer, and commercial applications. This variant of the WEPS04 introduces a new ultra low power mode. Now, use 5x less power!
Simply download the Phoenix Sensors application from our website and connect to the device. The sensor has the fastest update (200Hz) rate in the industry. Read and store synchronized data from four sensors simultaneously. The battery version will last up to 2 years in continuous (1 measurement/30 sec) use. Please contact us for Custom design availability.
The Mobile Software enables the user to store (200,000 Points) data to evaluate later.
Bluetooth Wireless Pressure Sensor WEPS14 Specifications
- Uses 5x Less Power!
- 25 uA Power Consumption
- Sensor Lasts 12-18 Months While Connected
- Connect up to 4 sensors simultaneously
- -20-85°C Operating Temperature
- Total Error Band 1%
- BLE 4.0 Wireless Communication (Android)
- 3-15,000 psi pressure ranges
- Absolute, Gauge, Vacuum
- Media –Liquid, Air, & Gas
- IP65 (& IP67)
- Consumer products
- Industrial Automation
- Pool Pumps
Liquid Level –Trucks, Gas/Water Tanks
The WEPS14 is a wireless pressure sensor used in a variety of liquid level applications, such as Water Trucks, Liquid Tanks, Oil tanks, and Spas. It can measure down to 1” of H20
HVAC – High & Low Side of A/C
The WEPS14 is a wireless pressure sensor that can measure up to pressures of 15,000PSI. It is accurate and robust enough for HVAC applications; if you need temporary remote Pressure and Temperature measurement of the system this sensor is your solution.
Dirty Air Filter Detection
The WEPS14 is a wireless pressure sensor that can down to pressures of 3PSI, so it is ideal for most air filter applications. For troubleshooting, the WEPS14 offers temporary remote Pressure and Temperature measurement of the system. The battery powered solution can last up to 12-months of continuous (1 measurement/10 seconds) use.
The WEPS14 is a wireless pressure sensor that can measure up to pressures of 15,000PSI, so it is ideal for Hydraulic Pump applications. For monitoring, the WEPS14 offers temporary remote Pressure measurement of the system. The battery powered solution can last up to 24-months of continuous (1 measurement/30 seconds) use.