PTS11 High Humidity Temperature Sensor

Home | Products | Temperature Solutions | Temperature Probes | PTS11 High Humidity Temperature Sensor

The PTS11 high humidity temperature sensor is an overmolded NTC thermistor probe built for wet, cold, and condensing environments. Its glass-encapsulated thermistor sits inside a sealed overmold, adding protection against water ingress where ordinary probes fail early.

We build the PTS11 on a low-cost, automated process. That makes it a strong fit for OEM programs at production volumes. It measures liquids, air, and gases, and it comes in many cable lengths, colors, and connector options. Download the datasheet for full specifications.

Why OEMs choose the PTS11 high humidity temperature sensor

Refrigerated cabinets, evaporator coils, and ice machines are hard on sensors. Constant condensation and repeated temperature swings can let moisture work its way into a probe and shift its reading.

The PTS11 is designed to keep that moisture out. The thermistor is sealed in glass, then fully overmolded onto the cable, so the sensing tip has no open seam. The result is a stable signal in the places where humidity is highest.

Every part is labeled with its part number and a date code for easy traceability. Before a new version is released, we verify its resistance at more than one temperature point during first article inspection.

Key features of the PTS11

  • Moisture protection: Glass-encapsulated NTC sealed in a TPE or silicone overmold
  • IP67 rated: Sealed for use in liquids, air, and gases
  • Standard 10 kΩ thermistor: Other resistance values and curves are available
  • Tight tolerance options: ±1% versions for applications that need closer accuracy
  • Wide temperature coverage: Series rated from -50 °C to +110 °C, with each version rated for its materials
  • Flexible cable lengths: From about 2 feet to more than 13 feet
  • Color-coded cables: Green, blue, yellow, black, and gray jackets make each sensor easy to identify
  • Housing choices: Overmolded tips or stainless steel 316L housings

High humidity temperature sensor applications

PTS11 high humidity temperature sensor with green overmolded cable

The PTS11 was developed for commercial refrigeration, but its sealed construction suits many systems where moisture never goes away, including:

  • Refrigerated cabinet air temperature
  • Evaporator coil temperature
  • Discharge and liquid line monitoring
  • Commercial ice machines
  • HVAC equipment and room temperature sensing
  • Commercial ovens
  • Semiconductor and liquid or gas chromatography equipment

Designing refrigeration equipment? ASHRAE’s refrigeration resources are a helpful reference for refrigerants, standards, and engineering practice.

A PTS11 version for every point in your system

The PTS11 is a family, not a single part. Versions differ by cable length, jacket color, housing, thermistor value, and connector. That lets you specify a cabinet sensor, a coil sensor, and a line sensor that all share one proven design.

Many versions are direct replacements that match existing commercial refrigeration OEM part numbers. Looking for a second source or a replacement for a legacy sensor? Send us the original part number, and our team will check for a matching version.

Simple integration with your wiring harness

PTS11-2 blue coil temperature sensor with overmolded NTC probe

PTS11 sensors ship with flying leads or a factory-installed connector, so they plug straight into your controller harness. We fit common connector housings from TE Connectivity, Molex, and JST, along with the matching terminals.

Need a custom length, connector, or label? Our custom cable assembly team can build the harness side too.

The series carries an IP67 rating, which means it is dust-tight and protected against temporary immersion in water. Learn more about what IP ratings mean from the IEC.

Choosing the right Phoenix Sensors temperature probe

We offer several NTC probes for different mounting needs. To measure the surface temperature of a pipe, consider the PTS32 Clip-On Pipe Temperature Sensor for HVAC. For a threaded process connection, the PTS24 NTC Thermistor Probe Assembly 1/4″NPT Brass mounts directly into a port.

Choose the PTS11 when you need a sealed, low-cost high humidity temperature sensor for wet or condensing conditions.

PTS11 high humidity temperature sensor FAQs

What makes the PTS11 a high humidity temperature sensor?

Its glass-encapsulated NTC thermistor is sealed inside an overmold, which adds protection against water ingress. The series is IP67 rated and measures liquids, air, and gases.

What thermistor values are available?

A 10 kΩ NTC at 25 °C is standard. Other resistance values, curves, and ±1% tolerance options are available for OEM programs.

Can the PTS11 replace an existing OEM sensor?

Yes. Many PTS11 versions are direct replacements for commercial refrigeration OEM part numbers. Send us your part number, and we will help you find the right version.

Configure a high humidity temperature sensor for your equipment

We support OEM customers from first prototypes through full production. Tell us your cable length, connector, color, and thermistor value, and our engineers will configure the PTS11 for your application.