PTS31 Ring Lug Temperature Sensor

Home | Products | Temperature Solutions | Temperature Sensors | PTS31 Ring Lug Temperature Sensor

The PTS31 ring lug temperature sensor gives you a simple, bolt-on way to measure surface temperature in equipment that vibrates. A glass-encapsulated NTC thermistor sits inside a crimped ring terminal, so you fasten the sensor directly to the part you need to monitor.

We designed the PTS31 for high-vibration HVAC and refrigeration equipment. It operates from −50 to 150 °C, carries an IP65 rating, and is built on an automated process that keeps cost down at OEM volumes.

Why OEMs choose the PTS31 ring lug temperature sensor

Equipment that runs all day puts sensors through constant vibration and moisture. A sensor that works loose or lets water in quickly turns into a service call. The PTS31 is built to avoid both problems.

The thermistor is glass encapsulated, then crimped into a lug-style terminal. That construction adds protection against water ingress and stands up to high vibration.

Mounting is just as simple. Put a bolt through the ring, tighten it to the surface, and the sensor is in place. There are no clips or adhesives to design around.

Inside is a 3,000 Ω NTC thermistor with ±0.2 °C accuracy from 0 to 70 °C. It reads like any two-wire resistive sensor, so it fits the measurement circuits your team already uses.

Key features of the PTS31

  • Bolt-on mounting: The ring lug fastens directly to the surface you want to measure.
  • Built for vibration: Designed for high-vibration environments such as HVAC and refrigeration equipment.
  • Moisture protection: Lug-style encapsulation guards the element against water ingress.
  • IP65 rated: Suited to air and gas media.
  • Accurate NTC sensing: Tight accuracy across the 0 to 70 °C band.
  • Wide operating range: Works from −50 to 150 °C.
  • Easy wiring: Two non-polarized leads, so either lead can go to either side of your circuit.
  • Cost-effective at volume: Automated manufacturing keeps unit cost low for OEM programs.

Ring lug temperature sensor applications

If you need a dependable surface reading on equipment that shakes, cycles, or sees moisture, the PTS31 is a strong fit. Typical OEM applications include:

  • Commercial refrigeration
  • HVAC equipment
  • Semiconductor equipment
  • Liquid and gas chromatography
  • Commercial ovens

Designing refrigeration or HVAC systems? ASHRAE’s refrigeration resources are a useful reference for standards and engineering practice.

PTS31 ring lug temperature sensor with glass-encapsulated NTC thermistor, ring terminal, and lead wires

Simple to mount, simple to wire

The ring terminal has a 0.265 in hole for a standard bolt or stud. Once it is fastened, the sensor sits in direct contact with the surface it measures.

Leads are 20 AWG stranded tinned copper with XLINK PVC insulation. You can order flying leads, or AMP (TE) 1/4 in fully insulated quick connects in male or female versions. Cable lengths of 1.5, 4, 6, and 8 ft cover most harness layouts.

Reading the sensor is straightforward. Measure its resistance, then convert to temperature with the resistance table in the PTS31 datasheet. The datasheet also covers dimensions, accuracy, and ordering codes.

IP65 means the sensor is dust-tight and protected against water jets. The IEC’s guide to IP ratings explains what each code covers.

Choosing the right Phoenix Sensors temperature sensor

The PTS31 is the right choice when you can bolt the sensor to a flat surface or stud. Other mounting styles call for a different design.

To measure a pipe, the PTS32 Clip-On Pipe Temperature Sensor for HVAC clips onto the line instead. If your design calls for a threaded fitting, look at the PTS24 NTC Thermistor Probe Assembly 1/4″NPT Brass.

Not sure which fits? Our engineers will help you compare options against your mounting, wiring, and temperature requirements.

PTS31 frequently asked questions

How do you install the PTS31 ring lug temperature sensor?

Bolt the ring lug directly to the surface you want to measure through its 0.265 in hole. No clips, adhesives, or thermal wells are needed.

What cable lengths and terminations are available?

The PTS31 comes with flying leads or AMP (TE) 1/4 in quick connects in male or female versions. Standard cable lengths are 1.5, 4, 6, and 8 ft.

Does the PTS31 have a polarity?

No. It is a two-lead resistive sensor and the NTC is not polarized, so either lead can connect to either side of your measurement circuit.

Configure your ring lug temperature sensor

We build the PTS31 for OEM programs, with the cable length and termination configured to fit your harness. Need the sensor delivered as part of a complete harness? We also build custom cable assemblies.

Talk to an engineer to spec your part, or request a quote today.