PRTD10-1K-FG-SS316L Stainless Steel Platinum RTD
The PRTD10-1K-FG-SS316L high temperature RTD sensor measures from −75 to 540 °C in a compact SS316L stainless steel housing. It pairs a laser-trimmed 1,000 Ω platinum element with a rugged metal package for demanding equipment.
It ships fully assembled with fiberglass-insulated leads, ready to build into your probe assembly. Download the datasheet for full specifications, resistance tables, and dimensions.
Why choose a stainless steel high temperature RTD sensor
Ovens, kilns, and process equipment push temperature sensors hard. The PRTD10-1K-FG-SS316L is rated to 540 °C for both operation and storage. Platinum RTDs are a proven choice in this range. NIST calibrates industrial-grade platinum resistance thermometers from −196 °C to 550 °C.
Inside this high temperature RTD sensor, a thin platinum film on an alumina substrate is laser trimmed to ±0.1% at 0 °C. The SS316L housing protects the element and is compatible with a range of media. Its small size and low thermal mass keep the response fast.
Stability matters as much as range. The element drifts less than 0.25 °C per year in occupied environments, so your readings stay consistent over time.
Key features of the PRTD10-1K-FG-SS316L
- Rated to 540 °C: Operates and stores from −75 to 540 °C
- Stainless steel housing: Ø0.118 in SS316L, compatible with a range of media
- 1,000 Ω platinum element: Pt1000 sensing with an alpha of 0.00375 Ω/Ω/°C
- Tight resistance trim: Laser trimmed to ±0.1% (±0.3 °C) at 0 °C
- Long-term stability: Less than 0.25 °C drift per year in occupied environments
- Low self-heating: Designed for 1 mA excitation
- Ready to build in: Fully assembled with 12 in, 28 AWG fiberglass-insulated leads
High temperature RTD sensor applications
With a metal housing and a 540 °C rating, this high temperature RTD sensor suits OEM equipment such as:
- Ovens and kilns
- HVAC equipment
- Autoclaves
- Process control systems
- Environmental test chambers
Designing measurement and control systems? The International Society of Automation offers standards and training for process instrumentation.

Built to integrate into your design
This stainless steel RTD is designed to go inside your own probe, housing, or assembly. It arrives fully assembled with 12 in leads and stripped ends. Its two leads are not polarized, so wiring is simple.
In a 2-wire circuit, lead resistance adds to the reading. Keep lead runs short or compensate for them in your measurement. A 1 mA excitation current keeps self-heating error low.
We also offer custom lead lengths, terminations, and complete probe assemblies for OEM volumes. Our custom cable assembly services can supply the harness that connects the sensor to your system.
Choosing the right high temperature RTD sensor
The PRTD10 family uses the same laser-trimmed platinum element in different housings. Both versions share the same trim, accuracy, and stability ratings. Choose the SS316L version when you need a metal housing or service up to 540 °C. It gives your design more headroom in hot ovens, kilns, and process equipment.
Does your application stay at or below 400 °C? Consider the PRTD10-1K-FG thin film platinum RTD, which has a smaller Ø0.095 in alumina housing. For a finished probe, see the PRTD10 Overmolded RTD Temperature Probe.
PRTD10-1K-FG-SS316L frequently asked questions
The PRTD10-1K-FG-SS316L is rated from −75 to 540 °C (−103 to 1004 °F) for both operating and storage temperature.
Both use the same 1,000 Ω laser-trimmed platinum element. The SS316L version has a Ø0.118 in stainless steel housing rated to 540 °C. The PRTD10-1K-FG has a Ø0.095 in alumina housing rated to 400 °C.
It is a 1,000 Ω platinum RTD with an alpha of 0.00375 Ω/Ω/°C. Many Pt1000 inputs default to a 0.00385 curve. Set your controller to the 0.00375 curve, or use the Callendar–Van Dusen coefficients in the datasheet.
Request a quote for the PRTD10-1K-FG-SS316L
We support OEM programs from first samples through full production. Tell us about your application, and our engineers will help you spec the right part.